Electricity

• Alternating Potential Difference 


  A continually oscillating current flow, which results in the potential difference across two points continually oscillating between a positive and negative value.
• Amps


  A unit of current
• Attraction 


  A force pulling two opposite charges together, when they are brought near each other
• Coulomb 


  The unit of charge
• Diode 


  A component that only allows current to flow through in the forward direction. They have the largest resistances in the reverse direction
• Direct Potential Difference 


  A one-directional current flow
• Earth wire 


  The green and yellow striped safety wire that prevents an appliance from becoming live
• Electric field lines 


  Lines representing an electric field, that point in the direction in which a positive charge would experience an electric force
• Electric Field 


  A region in which a charge will experience a non-contact, electric force. All charged objects have an electric field around them, and this field is stronger the closer you are to the charge.
• Electrical Current 


  The rate of flow of electrical charge. Its value is the same at any position in a single closed loop.
• Electrical Work


  When charge flows in a circuit, electrical work is said to be done.
• Filament Lamp


  A light emitting component consisting of an enclosed metal filament. Its resistance increases as the filament’s temperature increases.
• Insulation


  The coating around power cables that prevents electrocution and is colour coded to allow for easy identification.
• Light dependent resistor (LDR)


  A light sensitive component whose resistance increases as its temperature decreases.
• Live Wire


  The brown coloured wire that carries the alternating current from the supply in a mains power supply.
• Mains electricity

  An a.c supply, which in the UK has a frequency of 50Hz a value of 230V.
• Neutral Wire


  The blue coloured wire that completes the circuit in a mains power supply.
• Non-contact Force 


  A force experienced between two separated objects. Examples include gravity, and magnetic and electric forces.
• Ohmic Conductor


  A conductor whose current flow is directly proportional to the potential difference across it, when held at a constant temperature.
• Ohms 


  The unit of resistance
• Parrallel


  Components connected in parallel have the same potential difference across each component. The total current is equal to the sum of the currents flowing through each component.
• Potential Difference 


  The product of a component’s resistance and the magnitude of current flow through it.
• Repulsion 


  Caused when two like-charges are brought near each other.
• Resistance 


  A measure of the opposition to current flow.
• Resistors in Parallel 


  The total resistance is equal to the inverse of the sum of the inverses of the resistance of the parallel components. The total resistance of two parallel resistors is always less than the lowest individual resistor value.
• Resistors in Series 


  The total resistance is equal to the sum of the resistances of the individual components.
• Series 


  Components connected in series have the same current passing through each component but share the total potential difference of the power supply.
• Static Charge


  The charge caused by an imbalance of positive and negative charges in, or on, an object’s surface. It is often caused by electrons being rubbed from one surface onto another.