test brakes - should not feel spongy or slack - vehicle should not pull to one side
where i would find info for recommended tyre pressures - maufacturers guide - use a pressure gauge check pressures when tyres are cold
head restraint is correctly adjusted - rigid part is at least as hgih as the eye or top of the ears
check tread depth - no cuts or buldges - 1.6mm of tread depth accorss the central three quaters
check head lights and tail lights are working - turn on the car and walk around the vehicle
problem with any breaking system - warning light will illuminate
check indicators - turn it on and walk around the vehicle
check break lights - operate the break pedal and use the reflection in the window or door or as someone for help
check power assisted sterring is working - gentle pressure on the stering wheel when car is started should result in a slight movement - turning wheel just after moving should give an immediate indication
switch on rear fog lights - turn on lights - when visibility si below 100 meters
switch from dipped to main - push forward - check main beam warning light
check if engine has sufficient oil - identify the oil level - identiify min and max level on the dipstick
check engine coolant - identify high and low level markings on header tank where fitted
brake fluid - identify reservoir - check against high and low markings