T.L.E

Cards (27)

  • Cabinet holds the drawers, the cover or extension leaf, and the center drawers.
  • Drawers are used to keep materials for sewing.
  • Extension leaf covers the cabinet.
  • Foot rest is used while sewing on the treadle.
  • Belt guide holds the belt in place.
  • Drivewheel drives the balance wheel.
  • Pitman rod connects the treadle to the drive wheel crank.
  • Drive wheel crank turns the drive wheel.
  • Legs support the stand.
  • Arm is used to carry the whole part.
  • Balance wheel is found at the right of the bobbin winder.
  • Bobbin winder winds the thread in the bobbin.
  • Feed dog moves the material as it stitches.
  • Feed dog regulator is used to adjust the height of the feed dog.
  • Needle clamp holds the fabric against the feed dog.
  • Pressure bar holds the pressure foot and needle.
  • Pressure bar lifter lowers and raises the presser foot.
  • Shuttle holds the bobbin and bobbin case in place.
  • Spool pin holds the spool of thread.
  • Stitch regulator is used for reverse stitching.
  • Stop motion screw is used to release and tighten the movement of the needle bar.
  • Thread guide guides the upper threading of the sewing machine.
  • Thread take up lever controls the flow of the needle thread.
  • Throat plate gives the needle access to the lower thread through the feed dog.
  • Upper tension regulates the tightness and looseness of the stitches.
  • Bobbin is the spool for the lower thread.
  • Bobbin case holds the bobbin.