DRAFTING 3RD QT

Cards (23)

  • alphabet of lines
    are set of conventional line symbols used in orthographic drawing
  • Assembly drawing
    is an orthographic drawing of an object with its parts assembled.
  • auxiliary view
    is an extra or helping view of an orthographic drawing perpendicularly projected from an inclined surface.
  • detail drawing
    is a large-scale drawing that shows of part of a machine, device, or building.
  • exploded drawing
    is the showing of items in a diagram, but with their relative maintained positions.
  • frontal plane
    is a plane where the front view is projected in a single viewing
  • ground plane
    is the edge view of the ground upon which the object usually rests.
  • hem
    is used to strengthen the lips of sheet metal objects, made in 4 mm, 6mm, 10 mm, etc. standard sizes.
  • horizon
    represents the eye level of the observer.
  • horizontal plane
    is a plane where the top view is projected approximately as appear to the observer.
  • isometric drawing
    is one view drawing showing its three faces with equal measure.
  • oblique projection
    is a kind of pictorial drawing of an object which surface is parallel to the front plane while the others are oblique or inclined to it
  • parallel development
    refers to measuring lines parallel to one another. Examples are cube, cylinder and prism.
  • pattern
    is a part or model used as a guide for making something.
  • offset section
    shows the zigzag direction of the cutting plane if the principal interior features of an object are not located in a straight line.
  • orthographic
    is a graphic presentation of an object showing the three space dimensions of an object in its true shape and size.
  • pictorial drawing
    shows several faces of an object at once.
  • projection
    is a view conceived to be drawn or projected onto a plane.
  • redial development
    refers to measuring lines that converge at a certain points for example are the pyramid and cone. 3
  • seams
    are used to strengthen sheet metal sections. They are usually joined by soldering and/ or riveting process.
  • section
    is an orthographic view showing the inside view or construction of an object.
  • sectional view
    is a method of drawing presentation showing the interior parts of the building especially when the inner parts is complicated.
  • vanishing point
    represents the center of vision.