Fuel Cell Method

Cards (13)

  • Fill the solution container with 10ml of pure ethanol (fill container to the 10ml level)
  • Fill the remainder of the container with water to the 60ml level
  • Stir the liquid in the container thoroughly
  • Cut one 15cm long tube and put it through the plastic clamp
  • Connect the tube to the fuel tank and close the clamp
  • Connect the other end of the tube to the fuel cell lower fuel inlet. Make sure the connection is tight
  • Cut a 10cm long tube and connect it to the other outlet of the fuel cell (the remaining nozzle)
  • Pour the fuel solution into the fuel tank. Put the lid back on the tank
  • Put the fan blade onto the motor slowly and carefully
  • Use the wires to connect the fuel cell module to the fan module. Make sure you put the color red(Anode) and black(Cathode) correctly when you plug wires into the sockets
  • Open the clamp. You can see the liquid flowing out of the tube through the fuel cell
  • Once you see the liquid flows out of the tube, closing the clamp
  • Wait for 5-10 minutes, you will notice the fan starts to rotate