woodwork tools

• steel rule - measuring

  
• try square -marking lines to a 90 degree angle

  
• marking gauge - marking lines to a parallel edge

  
• mortice gauge - has 2 pins to mark a mortice joint parallel to an edge

  
• tenon saw - cutting straight lines in a piece of wood

  
• coping saw - cutting curved lines in a piece of wood

  
• bevel edge chisel - to remove waste wood from a wood joint or edge

  
• mortice chisel - to remove waste wood from a mortice joint

  
• jack plane - to remove thin strips of wood to reduce the depth or to create a chamfered edge

  
• rebate plane - cut or trim rebated joints in wood

  
• smoothing plane - remove small shavings from the wood to give a smooth surface finish

  
• hand router - to cut or smooth grooves in wood

  
• cross pein hammer - to hit pins into wood

  
• claw hammer: flat part drives nails into wood, claw part pulls nails out of wood

  
• wooden mallet - hitting the end of a chisel to help it remove the waste wood or to push a dowel into the wood

  
• coutnersink - drilling a cone shaped hole to fit a screw head in a piece of wood

  
• Forstener bits - drilling flat bottomed holes into a piece of wood