1.1

• Basic computer system model

  Input, Processing, Output and optional storage

  
• CPU

  Central Processing Unit
• Input device

  A device used to enter information into a computer.
• Output device

  any device that presents data from the computer
• Storage device

  a piece of computer equipment on which information can be stored.
• Central Processing Unit

  the part of a computer that decodes and executes instructions and manages the rest of the hardware.
• Von Neumann Architecture

  Instructions are fetched, decoded and executed one at a time.

  Instructions and data are held together in the same memory space.
• Bus

  The paths, or lines, on the motherboard on which data, instructions, and electrical power move from component to component.
• Address Bus

  carries addresses from the processor to memory and input/output devices.
• Data Bus

  sends data between the processor, memory and input/output devices.
• Control Bus

  carries signals to coordinate all the computer activities.
• CU

  Control Unit. Coordinates all the activities taking place inside the CPU.
• Control Unit functions

  1. controls the execution of instructions in the correct sequence.

  2. decodes the instructions.

  3. regulates and controls processor timing using regular pulses from the system clock.

  4. sends and receives control signals to and from other devices within the computer.
• ALU

  Arithmetic Logic Unit. Carries out all mathematical and logical operations.
• Arithmetic Logic Unit functions

  1. Logical Operations: AND, OR and NOT.

  2. Shift Operations: The bits in a binary number can be shifted to the left or the right a number of times.

  3. Arithmetic Operations: addition, subtraction, multiplication and division.
• Special Purpose registers

  special very fast memory locations within the CPU with specific purposes in the process of executing instructions.
• MAR

  Memory Address Register
• MDR

  Memory Data Register
• PC

  Program Counter
• ACC

  Accumulator
• Memory Data Register (MDR)

  Holds the data fetched from or to be written to memory.
• Memory Address Register (MAR)

  Holds the address of data ready for use by the MDR, or the address of an instruction passed from the PC.
• Program Counter (PC)

  The register that contains the address of the next instruction to be executed
• Accumulator (ACC)

  Holds the result of calculations.
• FDE Cycle

  Fetch Decode Execute Cycle. The CPU uses the FDE cycle to carry out the program instructions.
• Fetch

  1. The address A of the next instruction to be executed is copied from the PC to the MAR

  2. The PC is incremented so it points at the next instruction to be fetched. Simultaneously, the instruction held in location A is then copied into the MDR.

  3. The contents of the MDR are copied to the CIR.
• Decode

  The CU decodes the instruction in the CIR to see what is to be done next.
• Execute

  The instruction is executed.
• Cache

  Memory in the processor providing fast access to frequently used instructions and data.
• Factors affecting the speed of the CPU

  1. Clock Speed

  2. Number of Cores

  3. Cache Size
• Embedded System

  A computer system within a larger mechanical

  or electrical system designed for a

  specialist purpose.