W1 v2

• Pull-Push Rule


  Flexible tape that slides into a material case and it is used to measure irregular and regular shapes
• Ruler


  12-inch or one-foot rule and it is used to take/make simple measurements
• Meter Stick


  Used to measure a work piece
• Try Square


  Squaring, measuring and testing tool used to check adjacent surfaces for squareness
• Caliper


  Used to transfer measurements from the rule to the work
• Pencil


  Used to layout or mark cutting lines
• Marking Gauge


  Wood or metal tool consisting of a beam, head and a point used to mark a line parallel to the grain of the wood
• Chalk Line


  Used to establish a straight line on a surface
• Divider


  Tool with two metal legs used to lay-out an arc circle or step off division on a line
• Compass


  Used to scribe arcs and circle in a metal wood
• Try Square


  Tool used in squaring, measuring and testing the squareness of a wood
• Steel Square


  Framing square used to mark out the work for squaring and checking of angles and is used in the construction of roof framing and large furniture
• Spirit Level


  Tool used for testing vertical and horizontal surfaces
• Plumb bob


  Tool used to test the vertical and horizontal surfaces
• Chisel


  Tool used to trim and shape wood
• Plane


  Used to obtain a smooth and flat surface
• Spoke shave


  Small plane like tool from irregularly shaped objects
• Cabinet scraper


  Rectangular piece of steel with two cutting edges used for working flat and curved shapes
• Cross Cut Saw


  Handsaw used to cut the wood across the grain
• Rip-saw


  Hand saw used to cut the wood along the grain
• Back Saw

  Handsaw with a metal back and plywood and joinery
• Compass Saw


  Used to cut irregular shape either in large or small board
• Turning Saw


  Used to rip, cross and cut curves in lumber
• Coping Saw

  1. shaped saw used for cutting irregular shape in small board
• Dovetail Saw

  Small back saw with a straight chisel type handle used to cut very fine joints
• Auger bit


  Tool used to make hole in woods
• Expansive bit


  Tool used to drill holes of various sizes in woods
• Drill Bit


  Tool used for boring holes either in metals, woods or plastics
• 1. Clamp


  Used for holding together pieces of lumber while working
• Bench Vise


  Used to hold any materials or toois in place
• Bar Clamp


  Used to hold large boards or frames together while assembling or gluing
• Oil Stone


  Used for sharpening edge cutting tools such as chisel
• Files

  Used to smoothen metal and wood surfaces
• Paint Brush


  Used to apply paint or varnish on wood surfaces
• Nail Set


  Used to drive the head of nails lower than surface of wood
• Saw Set


  Used to bend the upper half of each tooth to one side or the other lo form a set
• Sander


  Portable power tool used for sanding furniture pieces
• Router

  Used for shaping surtaces and edges of furniture parts
• Jigsaw

  Power tool used primarily for cutting curved or irregular shapes of wood surfaces
• Circular saw

  Power saw used for many types of cutting, particularly on large panel stock