coc1

• Hardware tools

  • Electro static discharge
  • Hand tools
  • Cleaning tools
  • Diagnostic tools
• Anti static wrist strap


  an antistatic device used to prevent electrostatic discharge (ESD) by safely grounding a person working on electronic equipment.
• Philip Head Screwdriver 


  Used to loosen or tighten crosshead screws
• Anti-Static mat


  used to stand on or place hardware on to prevent static electricity from building up.
• Hex driver 


  sometimes called a nut driver, is used to tighten nuts in the same way that a screwdriver tightens screws.
• Flat head screwdriver 


  Used to loosen or tighten slotted screw
• Torx screwdriver 


  used to loosen or tighten screws that have a star-like depression on the top, a feature that is mainly found on laptop.
• Needle nose pliers

  • Useful for grabbing computer. screws dropped inside a computer
  • A fine-pointed pliers is the perfect tool for straightening bent pins inside
• Tweezers

  • used to manipulate small parts.
  • retrieving that lost screw inside of a computer case.
  • removing any jumpers from motherboards and drives.
• Part Retriever 


  This little gem is designed to pick up and hold small parts such as screws so that they can be inserted into and removed from tight places.
• Precision screwdriver 


  Used primarily for work on small, intricate devices, it is a hand tool with a similar intended use as a standard screwdriver possessing a but smaller form factor and a sleeker handle design.
• Crimping tool 


  This tool is used to crimp on the RJ-11/RJ-45 modular jack connectors on ribbon cable.
• Flashlight 


  used to light up areas that you cannot see well.
• Punch down tool


  It is used for inserting wire into insulation-displacement connectors on punch down blocks, patch panels, keystone modules.
• Wire stripper 


  A tool designed to remove the protective covering (jacket) off of a cable to expose the inner wires.
• Bow saw


  is a metal-framed crosscut saw in the shape of a bow with a coarse wide blade.
• Lint free cloth 


  used to clean different computer components without scratching or leaving debris.
• Multimeter 


  used to test the integrity of circuits and the quality of electricity in computer components.
• Magnifying glass 


  a device made in glass with handle, to exaggerate or to increase the apparent size of an object.
• Compressed air 


  used to blow away dust and debris from different computer parts without touching the components.
• Cable ties


  used to bundle cables neatly inside and outside of a computer.
• LAN tester


  A cable tester is an electronic device used to verify the electrical connections in a cable or other wired assembly.
• L square 


  is one of the most basic of the pattern making rulers. This ruler helps to create accurate go° angles and straight edges.
• Paint brush 


  a device made of bristles set in handle, use for cleaning sensitive parts of a computer.