TLE

• Scraper


  A flat thin sheet of metal with wooden or plastic handle, used to scrape hard to remove dirt or stubborn grime or plastic sticker
• Steel/Wire Brush


  Thin strips of metal inserted in a wooden or plastic stock, used to remove rust, hard to remove dirt and grime with sweeping action
• Utility Rag


  A fibrous cloth used in cleaning and wiping dirt and dust
• Pliers


  Generally used as all-around tools, with the capability for bending, crimping, cutting, holding, stripping and twisting
• Types of Pliers


  • Side Cutting Pliers
  • Combination Pliers
  • Long Nose Pliers
  • Stripping and Crimping Pliers
  • Vise Grip/Self-Locking Pliers
• Bench Vise


  A device for holding and bending pieces of metal, consisting of one fixed and one movable jaw operated by a clamping action of the screw
• Chisel


  A hand tool essentially used for cutting bolts, nuts and rivets
• Types of Chisel


  • Flat Cold Chisel
  • Diamond Point Chisel
• Electric Drill


  A portable power tool used for boring holes
• Drill Bit


  Cutting tools used to remove material to create holes
• File


  A hard steel tool used for smoothening metal, coming in various shapes and cutting edge types
• Types of File


  • Single-cut file
  • Double-cut file
• Hacksaw


  An excellent tool for cutting bolts, tubing and light to fairly thick metal
• Tin Snips


  A scissor-shaped tool used for cutting thin sheets of metal
• Kinds of Hammer


  • Ball-peen hammer
  • Brass or plastic-tipped hammers
• Puncher


  A tool made of steel, used to cut or drive out a bolt or lock needle pin out of a hole
• Types of Puncher


  • Starting Punch
  • Drift punch or Pin punch
  • Hole Punch
• Wrenches


  Tools for loosening and tightening of bolts and nuts
• Screwdriver


  A piece of long metal rod made of hardened steel and tempered at the tip, used to loosen and tighten screws
• Center Punch


  A tool made of hardened steel with conical tip point, used for marking the material before drilling
• Scriber


  A thin steel rod with pointed tip, used for marking fine lines on metal for layout work
• Pencil


  A thin strip of graphite enclosed in a wooden case, used for making drawings and marking lines
• Torque Wrench


  A special service tool for measuring the twisting force applied when tightening bolts and nuts
• Steel Rule


  A measuring strip of steel available in various lengths in metric and English system, used in linear measurement of short length or height
• Caliper


  A tool used in measuring the diameter of a circular work, with inside and outside calipers
• Metal Tape Measure


  A push and pull, long strip of thin sheet of metal with corresponding increments in millimeter and inches graduation
• Feeler Gauge


  A thin strip of metal with different thickness, used to measure or set gap and clearance between parts of mechanism