Save
TLE
Save
Share
Learn
Content
Leaderboard
Learn
Created by
Elisha Campos
Visit profile
Cards (89)
Measuring tools
is anything used to take account of quantative data, such as weight, length ,time or temperature
Sliding T-bevel
is called a "
false square
"
Tape
measure
is used for measuring things
Try
square
is used for measuring and marking a piece of wood to check its straightness or correspondence to an adjoining surface
Combination
square
is a tool used for
multiple
purposes in woodworking
Framing
square is used to measure/check a "
square
edges
" or right angle
Divider
calipers
is used to measure point to point or
divide
equal distance between points
Level
is a device establishing a
horizontal
plane
Ruler
is the
simplest
and most common measuring tools
Inside
calipers
is used to measure the
internal
size of an object
Calipers
is a device used to measure the distance between two opposite sides of an object
Outside
calipers
is used to measure the
external
size of an object
Folding
ruler
is used for measuring and setting down dimensions
Marking tools
are used for putting a
design
onto a piece of wood or metal before cutting or shaping it
Marking knives
is used to scribe a
line
Chalk
line is a tool for marking long, straight lines on relatively flat surfaces
Compass
is used to draw
circles
or arcs part of circles
Triangle
is a
three
sided ruler
Pencil
is used to lay out or mark cutting lines
Scribers
makes more
visible
mark than does a knife
Try
square
is used for squaring and testing
smaller
work
Steel
square
is sometimes called the
carpenter's
square
or the
framing
square
Sliding
T-bevel
square
is a
special
where used to lay out angles of different degrees and to test miter joints
Plumb
bob
is a tool used to check the
straightness
of posts, studs, and the like
Spirit
level
is used for both
guiding
and testing the work to a vertical or horizontal position
Edge-cutting
tools
are tools having thin, sharp edges and are used for cutting lumber
Planes
are tools for
shaping
wood.
They are used to flatten, reduce the thickness of, and impart a smooth surface to a rough piece of lumber or timber
Jackplane
is the most
useful
plain because of its convenient size and is used for planing pieces of wood that need to have straight edges and surfaces
Smooth plane
is used for
smoothening
a lumber surface flat and cleaning up flush-framed work, chamfers, and rounding edges
Block plane
is a plane having a single-iron blade that is placed with the beveled side up
Block plane
is used for
planing end grain
Jointer
plane
is used for
straightening
long and uneven surface of wood
Fore
plane
is used for planing large surface
Spokeshave
is used for curved surfaces that cannot be done with a circular plane
Chisels
are
indispensable
tools used in carpentry
Chisels
are one of the most abused tools. They are constantly used for prying, opening cases, as screwdriver, or an opener
Paring
chisel
is a
light
duty tool used to plane long parallel with the grain of wood
Firming
chisel
is a
heavy
tool adapted to withstand severe strain, as in framing work and where deep cuts are necessary
Cross
Cut
Saw
is a handsaw used to the wood across the grain
Rip Saw
is a hand saw used to cut the wood along the grain with flat front edge
See all 89 cards