MASTERS MASTERY

• Chapter 01


  • 6 sets
  • 1 set
  • 2 sets
  • 2 sets
  • 1 set
• Expiration of plumbing permit if the work is not commenced from the date of issuance

  1 year
• Expiration of plumbing permit if the work has been suspended or abandoned

  120 days
• Request for inspection for the replacement of an existing equipment shall be filed not more than after such replacement work is completed

  72 hours
• Request for inspection shall be filed with the Administrative Authority at least before such inspection is intended

  3 working days
• Sets of documents to be submitted/returned

  • Plumbing plans, drawings, diagrams and other documents
  • Approved plans, specifications and data to be retained by the Administrative Authority
  • Approved plans, specifications and data to be returned to the applicant
  • Approved plans, specifications and data to be returned to the Owner
  • Approved plans, specifications and data to be kept at the job site at all times while the work is in progress
• Branch interval


  Corresponds to a story height
• 2.43 m
• Brazed joints


  Obtained by joining of metal parts with alloys which melt at temperatures higher than 275°C but lower than the melting temperature of the parts to be joined
• Soldered joints

  Obtained by joining of metal parts with alloys which melt at temperatures above 149°C and below 427°C
• 0.60 m
• Combustible construction


  Any structure with structural framework which ignites and burns at a temperature of 756°C or less
• Confined space

  A room or space having a volume less than 1.4 cu. m., with 250 kilogram calorie of the aggregate input rating of all fuel burning appliances installed in that space
• Minimum for unconfined space

  28.3 lpm
• Equivalent of one fixture unit

  7.48 gals.
• 3 cu. m.
• One plumbing unit includes

  • water meter
  • water closet
  • lavatory
  • shower head and drain for a bathtub or shower stall
  • kitchen sink
  • Laundry tray
  • Floor drains
  • Faucets/hose bibb
• 2 pipe sizes
• 0.30 m
• 3 m
• 1.20 m
• 1 m
• 1.5 m
• 0.45 m
• 3.6 m
• 1.8 m
• 0.6 m
• 1/2 the depth of trench or 2.4 m
• GA 16 (1.6 mm)
• GA 20 (0.8 mm)
• 38 mm O.D.
• 32 mm O.D.
• 0.375 m
• 0.75 m
• 25.4 mm
• 51 mm to 228 mm
• 2% to 4%
• 559 mm
• 1.2 m
• 0.6 sq. m.