electronics

• Fluro pan


  An aluminum pan used to store food items like rice, corn, etc.
• Cast Heater


  A part of the rice cooker that delivers heat to the Fluro pan where the food items are located
• Heating element


  A part of a resistance heating appliance that gets hot when operated
• Mica insulator


  A transparent material that splits readily into thin sheets and has excellent insulating and heat-resisting qualities
• Rice cooker


  A domestic appliance designed for rice cooking but can also be used to cook other food items and for related purposes
• Timer


  A device that opens the electrical circuit after a predetermined period of time elapses
• Watt


  The basic unit of power which in one second gives rise to energy of one joule
• Power


  The rate at which electric energy is fed to or taken from a device measured in watts
• The possible cause for the unit not being able to turn on is AC power cord is not properly plugged in.
• If the unit does not operate when turned on, the possible cause could be The plug is connected properly. The back cover is not properly closed.
• If the unit has a light indicator on but the cast heater doesn't function, the possible cause could be Power cord is open.
• If the unit has an excessive burning period, the possible cause could be The timer is defective.
• The equipment used to discharge electrical charges produced by the human body is ESD (Electrostatic Discharge).
• The term for an exposure to an unpleasant situation is Danger.
• The set of rules or practices intended for a safe execution of work are Rules and regulations.
• The tools not recommended to be used in electronics work are Damaged tools.
• The best place for electronic hand tools and equipment is Tool cabinet.
• To prevent any form of damage caused by air, water, or rust, it is recommended to Oil the metal parts of a tool.
• After using a tool, it is important to clean it thoroughly with a wet cloth before keeping it in a tool box or cabinet.
• In case of injuries or accidents, it is important to report immediately to teacher.
• When working, it is important to avoid wearing loose clothing.
• Never use dull or damaged tools.
• The work area should be always clean and orderly.
• A place where activities pertaining to electronics projects take place is Electronics Laboratory.
• The equipment used to protect one's body from hazards and danger in the electronics trades is PPE (Personal Protective Equipment).
• To arrange methodically things in a laboratory is to Systematize.
• Damage or harm to the structure or function of the body caused by an outside agent or force is injury.
• Exposure to something unpleasant is risk.
• Something causing danger is hazard.
• A covering for concealing the face is mask.
• Keeping up with an A1 operation involves maintenance.
• A covering for the hand usually with separated fingers is gloves.
• Speaker terminal


  The point of connection from the output of the amplifier to the speaker
• RCA jack


  The point of connection from the RCA cord to the input of the amplifier
• Power input


  The point of connection from the power supply unit to the amplifier
• Power switch


  The device used to turn on and off the power of the amplifier
• Knob


  The three cylindrical accessories used to control the volume, bass, and treble
• When a capacitor is tested and the needle never deflects even when tested in the reverse position, the condition of the capacitor is open.
• When a capacitor is tested and the needle deflects higher or to lower resistance and never goes back to infinity even when tested in the reverse position, the condition of the capacitor is shorted.