TLE 4TH QUARTER
Cards (41)
- It is any tool that is powered by hand rather than a motor.
- Is used to drive negative slotted screws
- Is used to drive positive screws
- Specifically designed to insert, tighten, or to loosen and remove screws.
- Is a set of small screw drivers composed of slotted and phillips screw drivers.
- Is used in removing soldered wires and components.
- Is a device for applying heat to melt solder in attaching two metal parts.
- Used in removing soldered wires and components.
- Is a place where the soldering iron is placed during usage.
- Is a wire-cutting pliers.
- Is used for holding, bending, and stretching the lead of electronic components.
- Is a pair of opposing blades much like scissors or wire cutters.
- A common tool used in cutting various trades and crafts for a variety of purposes.
- Is used to bore or drill holes in the printed circuit board.
- Is used for cutting metals.
- Is a convex of lens which is used to produce a magnified image of an object.
- Made of bristles set in handle and used for cleaning dirty parts or a circuit or an object.
- An electrical component that limits or regulates the flow of electrical current in an electronic circuit. This is called electrical resistance and is measuree using Ohm's
- Uses colored bands to quickly identify a resistors resistive value and its percentage of tolerance .
- A smooth board usually rectangular in shape provided with perfectly straight edge which is used as working edge on which the T-square is moved while making drawings.
- The uses and advantages of T-squares, scales, set squares, and protractors are combined.
- Is used to draw parallel lines, vertical lines or inclined lines at 30 to 60 degrees.
- Used to mark or measure angles between 0 to 180 degrees. They are semicircular in shape and are made of plastic.
- They are triangular in shape with one corner, a triangle. They are used to draw lines at 30, 60, and 45 degrees to the vertical or horizontal.
- These are used to fix the drawing sheet on the drawing board.
- Used for drawing circles and arcs of the circles.
- Include symbols for electronic and electrical design that can traced using a drawing pencil.
- Is used to emit light when a circuit is passed through the device.
- A device used to store electrical energy
- Is used to control the current flow with two contacts.
- Is used to restrict the amount of current flow through a device.
- Is used to control the voltage flow with three contacts.
- Used to provide a supply for a circuit.
- Used to connect one component to another
- Shows the pictures of the actual components and wiring connections although it does not provide the exact size of components. It shows the exact proportion to the actual component or device.
- Shows wiring connection in a simplified, easy to follow manner. It may show either internal or external connections or both and is usually drawn as simple as possible to trace out the connection of the circuit.
- It shows the components used in their interconnection. It does not illustrate the physical size, shape, or chassis location of the component parts and devices.
- Uses blocks of squares, rectangles, or triangles to represent components, group of components or units of equivalent.
- Are the type of risks that are more likely fatal than any other hazards that can happen in a laboratory room,
- What can you get if you used the driving tools improperly?