Drawing and modifying commands

• Draws a straight line segment from one point to the next. Menu: DRAW>LINE, Key stroke: LINE/L

  LINE
• Draws a circle based on a center point and radius. Menu: DRAW>CIRCLE>CENTER, RADIUS, KEY STROKE: CIRCLE/C

  Circle
• Erases an object. Menu: MODIFY>ERASE, Key stroke: ERASE/E

  Erase
• Enables the print/plot configuration dialog box. Menu: FILE>PRINT, Key stroke: PRINT/PLOT CTRL + P

  Print
• Draws a rectangle after you enter one corner and then the second. Menu: DRAW>RECTANGLE, Key stroke: RECTANGLE/REC

  Rectangle
• Draw parallel lines based on the parameters you define. Menu: DRAW>MULTILINE, Key stroke: MLINE/ML


  Multi Lines
• Trims objects to a selected CUTTING edge. Menu: MODIFY>TRIM, Key stroke: TRIM/Tr

  Trim
• EXTENDS an object to a SELECTED BOUNDARY EDGE. Menu: MODIFY>EXTEND, Key stroke: EXTEND/EX

  Extend
• Offsets an object (parallel) by set distance. Menu: MODIFY>OFFSET, Key stroke: OFFSET/O

  Offset
• Brings up the OSNAP dialog box. Menu: TOOLS>OBJECT SNAP, Key stroke: OSNAP/OS/F3


  Object Snap
• Moves an object/s. Menu: MODIFY>MOVE, Key stroke: MOVE/M


  Move
• COPY object/s one or multiple times. Menu: MODIFY>COPY, Key stroke: Copy/CP

  Copy
• Stretches an object after you have selected a portion of it. Menu: MODIFY>STRECH, Key stroke: Stretch/S


  Stretch
• Creates a mirror image of an object or selection set. Menu: MODIFY>MIRROR, Key stroke: Mirror/MI

  Mirror
• Rotates an object to a certain angle. Menu: MODIFY>ROTATE, Key stroke: Rotate/RO

  Rotate
• Creates a round corner between two lines. Menu: MODIFY>FILLET, Key stroke: Fillet/F

  Fillet
• Creates an angled corner between two lines. Menu: MODIFY>CHAMFER, Key stroke: Chamfer/CHA

  Chamfer
• Creates a repeating pattern of the selected objects. Menu: MODIFY>ARRAY, Key stroke: Array/AR


  Array