ei yun padin

• Flat cord 


  Stranded wire used for temporary installation, commonly wiring and wred in extension cord arembly
• Electrical wire conductor-

  stranded wire made of multiple strands joined together to make a ringle wire
• Solid wire


  A single strand of copper wire or aluminum wire used for wiring installation inside and outside the buildings
• Conduits / Pipe


  Used as the passage of wires for protection and insulation
• Clamps


  Used to hold and another anchor electrical conduits in its proper position
• Connectors


  Used to attach metallic or non-metalic conduits to the junction or utility boxes
• Wrapped Tap or Toe Toint

  Used on large solid conductors where it is difficult to wrap the heavy tap wire around the main wire
• Y-Splice

  Generally used on small cables because the strands are flexible and all can be wrapped in 1 operation
• Plain tap Joint


  Used where the tap wire under considerable tensils stress circuit
• Knotted tap


  Used where the tap wire under heavy tensile stress
• Purchase Requisition


  A document generated by user department or storeroom personnel to notify the purchasing department items it needs to order, their quantity, and the time frame. It may also contain the autorization to proceed with the purchase. This is also called purchased request or requisition.
• Inventory


  Raw materials, work in process goods and (complety) completely finished goods that are considered to be the portion of a business's assets that are ready or will be ready for sale
• Job order or work order Form


  A written instruction to perform a work according to specific requirements, within specified timeframe and cost estimates
• Borrower's Form


  A form used to request for tools and equipments needed for a particular job. It indicates the department that the borrower is connected, the date, the job that is to be done, who is the person to approve the request, when it was returned and if it was good condition.
• Receiving and Inspecting Electrical Tools

  Every company's supply offices has a major role of purchasing the tools, equipments, materials, and crapplies that are needed in daily operations. As a supply officers, they should guarantee that the delivered crupplies, tools, equipment, and materials are recured, complete, and in good condition.
• Proper Tools Storage


  Proper storage of tools ensures their usefulness and functionality.
• Pull push rule


  Measuring tool used to measure the length of an object in centimeter and inches
• Test Light


  A pocket vize tool used to test the line wire or circuit if there is current in it
• Micrometer


  Used to measure the diameter of wires / conductors in circular mills. It can measure mail and big sizes of wires and cables.
• Wire gauge


  Used in determining the size of wires/conductors. The gauge ranges 0 to GO AWG (American wire Gauge)
• Ruler / Foot rule


  Used to measure length, width, and thickness of short flat object and sketching straight lines
• Ammeter


  Used to measure the amout of electrical current intensity in a circuit. The unit of measure is amphere (a). It is connected along the series to the circuit.
• Voltmeter


  Used to measure electrical pressure current or voltage of a circuit. The unit of measure is volt (V) this is connected across the parallel to the circuit.
• Clamp Ammeter


  Also called long-tester. It is used to measure current flowing in a conductor.
• Volt-Ohmmeter (vom)


  Otherwise called multi-tester, is used to measure the voltage, resistance, and current of a circuit. It is connected in parallel or series with the circuit depending on what to measure.
• Electrical Tools


  Implements for modifying raw materials for human use. Tools are considered as extension of the human hand thereby increasing its speed, power, and accuracy.
• Visual Inspection


  An expert's visual observation on the appearance of the tools and equipment
• Functionality


  Vibration or extra noice from the operation means problems parts and accessories have startled to develop
• Performance


  There is something wrong with the performance of either hand tools and equipment, it means they need an immediate maintenance repair
• Power supply


  Failure to meet the required power supply will result in the malfunctioning of hand tools or instruments
• Persons Involved


  The technical person who has the particular knowledge and skills about the technology involved in tools and instruments functionally
• Electric drills


  An electric motor that drives chuck and has jaws that can be opened and then clarea to grip a drill kit
• Grinding Tools


  Can be either bench-mounted or installed on a pedestal. They may either have a grinding wheel, view wheel or two grinding wheels
• Vacuum cleaner


  Used for cleaning the floor and car interior after cervice
• Pneumatic Torque Wrench


  Use compressed air quickly powerfully turn nuts, bolts and other objects
• Air Chisel


  Use to arire a cutting hammering tool. An air hammer drives a chired to cut off a nut that has frozen to a stud
• Air drill


  Is a lighter than a comparable electric drill. Repeatedly stalling or overloading does not damage or overheat the air drill
• Air Racket


  Used sockets that and attachment from a Standard socket set
• Pneumatic Floor Jack


  Used to comprenen compressed air to flow into the Jack cylinder and cauer the ram to extend and raise the vehicle
• Cleaning Supplies


  • Grease - best for cleaning the garket, real and etc.
  • Soap and water - used to wash / clean benches, tables etc.
  • Thinner - Clean up paints spill on the floor
  • Silicon LUBRicants - very merr lubricant.