ADVCOMPT week 3
Cards (31)
- it is the standards that describe the size, shape, and major features of these components so that they work together
- the first ATX P1 power connector used __ pins
- a power supply that provides this 4-pin 12-volt power cord is called?
- p1 24-pin power connector follows ATX version_?
- it is designed to support an AMD processor
- is a motherboard form factor specification introduced by Intel in 1999
- it is designed with the gamer in mind
- mini itx size
- micro atx size
- standard qtx size
- it is the most commonly used form factor today
- It is a major variation of ATX and addresses some technologies that have emerged since the original development of ATX.
- Avariation of the Micro-ATX. This form factor is smaller than the Micro-ATX and designed for small systems such as a home theatre system
- It is a variation of Micro-ATX. It is commonly used in slimline and all-in-one cases, but can fit into any FlexATX, MicroATX, or ATX case that follows the ATX 2.03or higher standard
- it is designed for optimum airflow
- A low-profile PC motherboard from Intel for slimline cases, introduced in 1987.
- what does NLX stands for?
- it is the largest of all ATX variant
- it is perfect for enthusiastic gamers or professional production workers (graphic designers, video editors, etc.) However, to enjoy such utilities you will have to pay an enormous amount
- ____ cases are built to accommodate all form factors for personal computers
- it is the case that was used for the first personal computers that sat flat on a desktop doing double as a monitor stand
- it sits upright on the floor or a desk and can be as high as two feet and hasroom for several drives
- Often used for servers, this type of case is also good for PC users who anticipate upgrading, because tower cases provide maximum space for working inside a computer and moving components around
- Also called a microtower, is the smallest type of tower case and does not provide room for expansion
- They are popular for MicroATX and FlexATX Systems. Usually, a micro ATX motherboard is the one that fits best
- Also called midi-towers or midsize towers, are the most versatile and most popular
- They are midrange in size, typically 17-20 inches and generally have around six expansion slots and four drive bays, providing moderate potential for expansion.
- The mini tower is the smallest size in PC cases. The mini tower cases typically stand between 13-14 inches tall.
- used for high-end personal computers and servers
- the largest of the three traditional PC tower sizes. Full tower cases typically stand at the height of 21 inches and above