components

• A microcontroller is a device used to control certain electronic devices and is used for coding.
• Electronic components are basic discrete devices in any electronic system to use in electronics otherwise different associated fields.
• These components are basic elements that are used to design electrical and electronic circuits.
• Active components include Light Emitting Diode (LED), Transistor, Integrated Circuit (IC), Battery, Relay, Diode, Solar Cell, Current Sensor, SMD Components, Resistor.
• Resistor are two-terminal passive components that implement electrical resistance as a circuit element.
• Resistor electrical components that limit or regulate the flow of electrical current in an electronic circuit.
• Carbon Composition Resistor is a type of resistor which consist of a solid cylindrical resistive element with embedded wire leads or metal end caps to which the lead wires are attached.
• Thermistor is a resistance thermometer, or a resistor whose resistance is dependent on temperature.
• Wire-wound Resistor is often used in high power resistor applications or some other uses where its properties of low noise and power dissipation are needed.
• Metal-film Resistor uses metal film to limit the flow of electric current to certain level.
• Carbon Film Resistor is a type of fixed resistor that uses carbon film to restrict the electric current to certain level.
• Variable Resistor is an electronic component that is used to vary the amount of current that flows through a circuit.
• Sliding Potentiometer, Rotatory Potentiometer, Rheostat, Cermat, Preset, and Trimpot are types of variable resistors.
• Light Dependent Resistor is a type of resistor which decreases resistance with respect to receiving luminous or light on its receiving surfaces.
• Diode is a two-terminal electronic component that conducts electric current in only one direction.
• Gunn Diode is a PN junction diode, this sort of diode is a semiconductor device that has two terminals.
• Laser Diode is a type of diode that generates coherent light.
• Light Emitting Diode (LED) is one of the most standard types of the diode.
• When the diode is connected in forwarding bias, then the current flows through the junction and generates the light.
• Photo Diode is used to detect light.
• Schotty Diode is a type of diode that is used in high voltage circuits.
• Zener Diode is used to provide a stable reference voltage.
• Transistors are electronic components that regulate current or voltage flow and act as a switch or gate for electronic signals.
• Recovery Diode is a type of microwave diode used to generate pulses at very high frequencies.
• Ceramic Capacitor is a type of capacitor that is non-polarized capacitors made out of two or more alternating layers of ceramic and metal.
• The ceramic acts as the dielectric and the metal acts as the electrodes.
• A piezo electric buzzer can be driven by an oscillating electronic circuit or other audio signal source.
• Relay is an electro-magnetic devices that convert a magnetic flux generated by the application of a low voltage electrical control signal either AC or DC across the relay terminals, into a pulling mechanical force which operates the electrical contacts within the relay.
• Variable Capacitor are non-polarized variable capacitance type of capacitors.
• Switches are electrical components which can make or break electrical circuit automatically or manually.
• Varactor Diode is a type of diode that is precisely designed and enhanced such that they allow a high range of changes in capacitance.
• Film Capacitor is a type of capacitors that is non-polarized.
• Integrated Circuit/IC, also called a chip, microchip or microelectronic circuit, is a semiconductor wafer on which thousands or millions of tiny resistors, capacitors, diodes and transistors are fabricated.
• Capacitor is a passive two-terminal electrical component used to store energy electrostatically in an electric field.
• Electrolytic Capacitor is a type of capacitor that is generally used where large capacitance is needed.
• Variable Capacitor are generally used in Transmitters and Receivers, Transistor Radios etc.
• There are two types of transistors: NPN type which is outward and PNP type which is inward.
• A capacitor consists of two conducting plates separated by an insulating material called the dielectric.
• Transformer is a device used to either raise or lower voltages and currents in an electrical circuit.
• Rectifier Diode is a two-lead semiconductor that allows current to pass in only one direction.