Hand tools

• 1. Flat screwdriver 


  is used to driven or fasten negative slotted screws.
• 2. Philips Screwdriver 


  is used to drive or fasten positive slotted screws.
• 3. Jeweler's Screwdriver set


  is a set of small screwdrivers composed of slotted and Phillip's screwdrivers
• 4. Stubby Screwdriver 


  it comes in either standard or philips screwdriver with short shank or blade and a shortened handle used to turn screws in space where standard screwdriver cannot be used.
• 5. Soldering iron


  is a device for applying heat to melt something lead so that can flow into the joint between two metal parts. In electronics, it is used to solder electronic components and wire the printed circuit board. The preferable soldering iron for the soldering process in PCB is about 20 to 30 watts
• 6. what does PCB stand for?

  Printed Circuit Board
• 7. Soldering Tool stand


  is a place where the soldering iron is placed during usage to avoid the accident and flammable materials
• 8. Soldering Pump/Desoldering Tool


  is used in removing soldered wires and electronic components on printed circuit boards for troubleshooting and repair purposes.
• 9. Long Nose


  is used for holding, bending, and stretching the lead of the electronic components or connecting wires.
• 10. Side Cutter


  is a wire cutting plier, though they are not used to grab or turn anything but are used to cut wires.
• 11. Wire stripper


  is is a pair of opposing blades much like scissors or wire cutters. The Addition of center notch makes it easier to cut the insulation without cutting the wire.
• 12. Combination Pliers/Lineman Pliers


  are multi-purpose pliers, combining jaws with wire cutters. They can be used For gripping, compressing, bending, twisting, extracting and cutting various materials.
• 13. 12V Mini-Drill


  is used to bore or drill holes in printed circuit board(PCB)
• 14. Portable Electric Drill 


  is used for the boring hole(s) in plastic or metal chassis with the use of drill bits having sizes from 1/6 to approximately 1/4
• 15. Metal Files


  these are hand tools having a series of sharp, parallel ridges or teeth. Most files Have narrow, pointed tang at once end to which a handle can be fitted.
• Flat file 


  is parallel in width and tapered in thickness; they are used for flat surfaces and edges.
• Round File


  is gradually tapered and used for many tasks that require around the tool, such as enlarging round holes or cutting a scalloped edge.
• Half Round File


  is tapered in width and thickness coming to a point, and is narrower than a standard half round and used for filing inside of rings.
• Utility Knife


  is a common tool used in cutting various trades and crafts for variety of purposes.
• Hacksaw 


  is used for cutting metals. Some have pistol grips that keep the hacksaw firm and easy to grip. The small hand-held hacksaws consist of a metal arch with handle that fits around narrow, rigid blade.
• Magnifying Glass


  is a convex lens that is used to produce a magnified image of an object. The lens usually mounted in a frame with a handle
• Paint Brush


  it is made of bristles set in the handle, used for cleaning dirty parts of a circuit or an object.
• Volt Ohm Millimeter

  (VOM)/Multi-tester

  it is a device that has three functions: it has a voltmeter that measures AC and DC voltages; it has an ohmmeter that measures resistance, and a milimeter that measures a small amount of DC
• Oscilloscope


  it is a device for viewing oscillations, as of electrical voltage or current, by a display on the screen of a cathode ray tube
• Signal generator


  is a device that can produce various patterns of voltage at a variety of frequencies and amplitudes. A common use is to test the response of circuits to a known input signal. Most function generators allow you to generate sine, square, or triangular Ac function signals.
• Examples of Driving tools

  • Screwdrivers
  • Flat Screwdriver
  • Phillips Screwdriver
  • Jeweler's Screwdriver set
  • Stubby Screwdriver
• Examples of Soldering tools

  • Soldering iron
  • Printed Circuit Board (PCB)
  • Soldering Tool Stand
  • Soldering Pump /Desoldering Tool
• Examples of splicing Tools

  • Long nose
  • Side Cutter
  • Wire Stripper
  • Combination Pliers(Lineman Pliers)
• Boring Tools

  • 12V Mini-Drill
  • Portable Electric Drill
  • Metal Files
  • Flat file
  • Round File
  • Half round file
• Cutting tools

  • Utility Knife
  • Hacksaw
• Auxiliary Tools

  • Magnifying Glass
  • Paint brush