Save
Coastal Enviroments
Coastal Processes
Save
Share
Learn
Content
Leaderboard
Learn
Created by
Cheryl launt
Visit profile
Cards (27)
Coastal processes
Divided into
marine
(
offshore
,
water-based
) and
terrestrial
(
onshore
,
land-based
) processes
Coastal processes
Wave action
Erosion
Transportation
Weathering
Mass movement
Waves
Formed
by
winds blowing over
the surface of the
sea
Factors affecting wave height and strength
Fetch
Amount of time the wind blows
Strength of the wind
Swash
Movement of water up the beach
Backwash
Return movement of water down the beach
Types of waves
Destructive
Constructive
Destructive waves erode the coastline in four ways: hydraulic action, attrition, corrosion, abrasion
Abrasion
Erosion by rubbing, like sandpaper
Attrition
Erosion by particles colliding and wearing each other down
Transportation of material
1. Traction
2. Saltation
3. Suspension
4. Solution
Longshore drift
The movement of sediments along a coast by waves that approach at an angle to the shore but then the swash recedes directly away from it.
Longshore
drift
characteristics

1. Prevailing wind pushes waves at an angle to the beach
2. Swash carries material up the beach at the same angle
3. Backwash carries material down the beach at right angles
4. Repeated zig-zag movement transports material along the beach
Weathering
Is the physical or chemical breakdown of rock in-situ (in the place where they are)
Types of weathering
Freeze-thaw (mechanical)
Salt weathering (mechanical)
Chemical weathering
Biological weathering
Weathering weakens cliffs and makes them more vulnerable to erosion
Freeze-thaw weathering
Water gets into cracks, freezes and expands, opening cracks wider
Chemical weathering


Rainwater reacts with minerals in rock, creating new material
Biological weathering
Plants and organisms grow in cracks, forcing rock apart
Mass movement
Downhill movement of material under the influence of gravity
Types of mass movement
Soil
creep
Flow
Slide
Fall
Slump
Soil creep
Slow downhill movement of soil, below 1cm per year
Flow
Occurs on slopes 5-15 degrees, after soil becomes saturated
Slide
Movement of material 'en masse' that remains together until hitting the bottom
Fall
Rapid movement on steep slopes, caused by weathering, rainfall, earthquakes, hot weather
Slump
Rotational slip of a large area of land on weaker rock types like clay
Sub-aerial processes affecting cliff shape
1. Freeze-thaw weathering weakens cliff, allowing easier erosion
2. Chemical weathering dissolves less resistant rock faster, changing cliff shape