Untitled

• AC Motor converts AC electrical energy into mechanical energy producing a mechanical rotary action that performs some kind of work.
• Antistatic is a container which resists generation of triboelectric charge as the device is inserted into, removed from or allowed to slide around it.
• Bushing is a sleeve protecting a conductor where it passes through a hole in motor.
• Capacitor is used to boost the voltage to a motor.
• Capacitor for Start Motor is a low reactance non-polar electrolytic capacitor connected in series with the start winding.
• Motor is a rotating electric machine changes applied electrical energy or power into mechanical output energy or power.
• Rotor is the part of an electric motor that turns or rotates.
• Run Winding is the winding in an electric motor provides the power for turning the rotor during operation.
• Rectifier is a diode circuit that converts AC to pulsating DC.
• Resistor is a component made of material that opposes the flow of current and therefore has some value of resistance.
• Rotary Switch is an electromechanical device that has a rotating shaft connected to one terminal capable of making, breaking a connection to one or more other terminals.
• Shaft is the part of a rotor that carries other rotating members and that is supported by bearings in which it can rotate.
• Stator is the stationary part of the motor which the field windings are placed.
• Front Guard is a protective metal mesh wire used to prevent the fan blade from any physical contact with foreign objects.
• Guard Mark is a logo oof the manufacturer of the electric fan which is mounted at the center of the front guard.
• Switch Box is a panel board for the controls of the electric fan
• Inner Pipe is a metal tube inserted into the outer tube intended for the proper height adjustment of the electric fan
• outer pipe is a metal tube attached to the base stand of the electric fan
• base stand is the bottom or lowest part of the electric fan where it stands on as a foundation
• blade is a propeller made out of plastic or metal attached to the motor shaft and agitates air when the motor rotates.
• remote control is a transmitter device used to control the electric fan from a distance
• Power controller is a circuit that controls the ampunt of power supplied to the motor.
• Sensor is the input receiver that detects input signal coming from remote control
• Manual control is a push button switch that controls manually operation of the electric fan
• Non-polarized capacitor is a low reactance non-polar capacitor connected in series with the start winding of an electric fan
• timer is used to switch on or switch off automatically with predetermined time
• comparator is a processing circuit that accepts the input signal coming from remote control, manual switch or timer switch.
• AC motor is rotating electric machine which changes applied electrical energy or power into mechanical output energy or power
• AC plug is connector intended for connecting to the main source 220 v
• the electric fan is late 19th century
• the electric fan founder is Schuyler wheeler in 1886
• the electric fan is powered by DC, AC, or fuels like alcohol, oil, and kerosene
• Start winding is the auxiliary winding of the motor with comparatively high resistance and lower inductance
• system control microprocessor is an integrated circuit that can recognize and respond to commands from the operator by monitoring the Dc voltages at the output terminals.
• schematic diagram is an illustration of an electrical or electronic circuit with the components represented by their symbol
• short circuit is a low resistance connection between two points in a circuit typically causing excessive current
• solder is a metallic alloy used to join two metal surfaces
• soldering is a process of joining two metallic surfaces to make an electrical contact by melting solder across them
• substrate is a mechanical insulating support upon which a device is fabricated
• switch is an electrical device having two states on or off