Steps

avatar
Created by
KC Saludadez

Cards (3)

  • STEPS IN DISASSEMBLING PC
    1. Prepare all the tools and materials needed.
    2. Make sure that PC is disconnected from power source.
    3. Remove all jewelry and accessories.
    4. Open the side panel / cover.
    5. Unplug ATX 24 pin, 4 pin 12v and SATA power connector.
    6. Detach the power supply unit.
    7. Detach the Hard disk drive.
    8. Pull out the Motherboard.
    9. Remove the RAM.
    10. Remove the CPU fan
  • STEPS IN ASSEMBLING PC
    1. Open Case. Remove the back screws. ...
    2. Mount Motherboard. Screw motherboard standoffs into the case. ...
    3. Mount Processor (CPU) ...
    4. Install CPU Fan
    5. Mount Memory (RAM) ...
    6. Install Power Supply (PSU) ...
    7. Connect the Cables of PSU and other Connection
    8. Mount Storage Drives.
    9. Connect the SATA cable to hard disk
    10. Close the Side Pannel and Screw the Case
  • STEPS IN INSTALLING WINDOWS 10 OPERATING SYSTEM

    1. Insert Bootable Device (UEFI flash drive).
    2. Turn on the Computer.
    3. Press DEL or F2 key (depending on manufacturers specifications).
    4. Configure BIOS setting
    5. Press F7 key and create UEFI flash drive as priority
    6. Press F10 key to save changes and then exit.
    7. Wait to restart and select language to install.
    8. Select options on what operating system to install.
    9. Create partition on hard drive.
    10. Complete 100% installation and check for all windows updates.