Tle

• Soldering


  commonly known as Sweating is a building connection between 2 pipes ends overlaps one another
• Brazzing


  Is the same process of soldiering but Higher melting point solder and produces a stronger joint
• Brazing and soldering.


  Are both used in mechanical system to connect pipe for a cheaper cost than mechanical connection.
• Solvent welding.


  Similar processes the metallic welding without the heat.

  Is used for joining plastic pipes such as PVC CPVC abs and their variation.
• Mechanical connection.


  The above joint process are all permannent fistures that alters the molecular integrity of itself
• Mechanical fittings are those that can be easily removed and replaced again if necessary with one notable exception compression fittings.
• Flanges


  Considered very strong connections and can be prefabricated to the correct sizes.

  Are used in industrial applications with high pressure and large diameter pipe.
• Threaded pipes.


  One of the easiest connection of pi to use.

  Considered a relatively strong joint
• Compression fittings.


  Are secured by squeezing to tubing by itself to form a watertight bond.
• Hub and spigot


  Is a cross between several of the above mentioned connectors.

  Also known as bell or socket is an in large part of the pipe.