TLE

• These tools are made of steel hardened and tempered

  Screwdriver
• Resembles a negative sign

  Standard/Flat screwdriver
• Resembles a positive sign

  Philips screwdriver
• It's function is drive screw with hexagonal slot head

  Allen screwdriver/Wrench
• Used in driving or pounding

  Hammers
• Used for driving and pulling out nails

  Claw hammer
• Usually used in driving chisel. The head of rubber mallet.

  Mallet
• It has two heads, one flat and other, called the peen, usually used in metalworks.

  Ball Peen hammer
• These tools are made of metal of insulators.

  Pliers
• This is used for gripping, holding and cutting electrical wires and cables even small nails.

  Combination pliers
• This type of pliers is used for cutting fine, medium and big wires and cables.

  Side cutting pliers
• This is used for cutting and holding fine wires.

  Long nose pliers
• A tool used for removing insulation of medium sized wires ranging from gauge #10 to gauge #16

  Wire stripper
• This is used by linemen to remove insulation of wires and cables in low and high voltage transmission lines

  Portable electric drill
• This tool is used to cut metal conduit and armored cable.

  Hacksaw
• A device that acts convenient source of electrical energy for current consuming appliances. It is where the male plug of appliance is inserted and usually fastened on the wall or connected in and extension cord

  Convenience outlet
• Types of convinience outlet

  Surface type and flush type
• A device inserted to a convenience outlet to conduct electric current

  Male plug
• A protective device used to automatically blows and cuts the current when trouble in the circuit such as short circuit or overload occurs

  Circuit breaker
• A devices that hold and protect the lamp

  Lamp holders
• A device that connects and disconnects

  Switch
• An octagol shaped

  Junction box
• And rectangular shaped mettalic or plastic (PVC)

  Utility box
• It is a written instruction to perform a work according to specific requirements, within specified time frame and cost estimates

  Joborder/workorder
• It is used to request for tools and equipment recorded for a particular job it indicates the department that the borrower is connected, the date, the job that is to be done who is the person to improve the request when it was returned and if it was in good condition

  Borrowersform
• It is a document generated by a user department items it needs to order, their quantity, and the timeframe it may also contain the authorization to proceed with the purchase. This is also the purchase request or requisition

  Purchaserequisition
• Are raw . materials, work-in process goods and finished goods that are the portion of a business assets that are ready or will be ready for safe

  Inventoryform
• This kind of joint is commonly used to join two or more conductors inside the junction box

  Rattailorpigtail
• This method of wrapping is generally used in small cables because the strands are flexible and all can be wrapped in one operation

  Y-splice
• This is used where the tap wire is under heavy tensile stress

  Knotted tap
• This is used when the tap wire is under considerable tensile stress circuit

  Plaintapjoint
• This is used as a temporary tap usually done constructions sites. The easy twist will facilitate tap wire movement

  Aerial tap
• This two-tap wire turned simultaneously and is used where the two tap wire is under heavy tensile stress

  Duplexcrossjoint
• This is the most widely used splice or joint in interior wiring installation to extend the length of wire from one point to another

  Westernunionshort-tiesplice
• This is used extensively for outside wiring to extend the length of wire from one end to another

  Westernunionlong-tie
• The same application is done as in plain tap and the only difference is that this tap is a combination of two plain taps place side with each other

  Crossjoint
• This is used on large solid conductors where it is difficult to wrap the heavy tap wire around the main wire

  Wrappedtaporteejoint
• Is a pocket size tool used to test line wire circuit if there is current in it

  Testlight
• Is used to measure the diameter of wire/conductors in circular mils. It can measure small and big sizes of wires and cables

  Micrometer
• Is used to determining the size wires/conductors. The gauge ranges from 0 to 60 awg (American wire gauge)

  Wiregauge