LESSON 10.2

Cards (18)

  • Upper Crosshead
    o The topmost part of the UTM
    o It is fixed
  • Upper Grip
    Used to grip the upper end of the sample
  • Screw
    Used to adjust the position of the lower crosshead
  • Lower Grip
    o Used to grip the lower end of the sample
    o Together with the lower crosshead, it moves downward during tensile and peel/adhesive test
  • Column
    o Supports the test frame
  • Lower Crosshead
    o Lower head of the UTM and is one of the important parts
    o Has upward and downward movement
  • Press Plate/Compression Plate
    It is where compression and bending tests take place
  • Working Table
    o Put the compression and bending test fixtures
  • Cylinder
    o Can be seen when the metal sheet is removed
    o Test loading system
  • Metal Sheet
    o Covers the internal parts of the UTM
  • Baseplate
    o Supports the whole UTM
  • Grip Control System
    o Controls the upper and lower grips
  • Control Processing Unit
    Brain of the computer where most calculations take plac
  • Computer Monitor
    Output device that displays information
  • Printer
    o Used to print the results of the test conducted
  • Power Switch
    o Used to turn on the machine by rotating the switch clockwise
  • Emergency Stop
    o A fail-safe control switch that provides both safety for the machinery and for the person using the machinery
    o Used to stop the machinery quickly when there is a risk of injury or the workflow requires stopping
  • Digital Controller
    Used to ensure that the specified test rate is accurately maintained throughout the test