baking recipe

• These are pipes that are lightweight and resistant to chemicals, making them suitable for drain, waste, and vent [DWV] systems in residential and commercial buildings. Answer: Acrylonitrile Butadiene Styrene
• It is done to ensure that every part of this system is working and in good condition because it needs to be reliable in times of emergencies. Answer: Safety Testing
• As discussed, there are two purposes of plumbing in MEPFS. Answer: Provide clean water and manage wastewater
• One pipe-which can serve as both a ventilation pipe and a soil pipe:-is needed. Stack terminates roof eaves level with a cage or perforated cover and is situated either within or outside the property's external wall. Answer: Single Stack System
• The purpose is to provide reliable backup power to essential loads such as emergency lighting, fire alarms, communication systems, and life safety equipment to maintain safety and functionality during emergencies. Answer: Emergency power systems design
• Typically housed in telecommunications rooms.or data centers. Structured cabling runs through conduits and cable trays to connect communication outlets and devices throughout the building. Answer: Communication and data systems design
• This is the oldest system of plumbing. There are two sets of vertical pipes: a woste water waste pipe (waste discharge pipe) and a soil water soil pipe (soil discharge pipe). Answer: Two Pipes System (Dual Pipe System)
• Absorbs heat from the air inside the establishment. Answer: Evaporator
• Give at least 1 example of an active fire protection system. Answer: Active: Sprinklers, Fire Extinguishers, Fire Alarms, Standpipe system
• Its main objectives are to prevent the introduction of foul gasses from the septic tank's sewage and to maintain clean and healthy conditions within a building. Answer: Sanitary System
• Provide the three types of wood. Soft Wood, Hard Wood, Engineered Wood
• In plastic, what is the acronym ABS stands for? Acrylonitrile Butadiene Styrene.
• Wood is a renewable resource when sourced from responsibly managed forests. Also, a biodegradable material that can reduce long-term environmental impact. Sustainability
• Wood has a natural, warm, and attractive appearance. There are many types of wood, each with unique grain patterns and colors. Aesthetic Appeal
• This is when a wood must be to preserve its appearance and integrity. It is crucial for preventing pest damage and rotting. Maintenance
• Vulnerability of chemicals and plastics which cause degradation, cracks, etc. Chemical sensitivity
• Interlocking tiles that can be easily assembled and disassembled, offering flexibility in creating temporary or reconfigurable partitions. Modular Partition
• Used to create transparent or translucent partitions that allow light to pass through, ideal for offices and modern interiors. Glass Partition Tiles
• A function of the ceiling which manages sound within a space. Acoustic
• A type of ceiling work with recessed squares like a grid pattern. Coffered
• These materials are essential in construction and various industries to protect structures and objects from water infiltration - WATERPROOFING MATERIALS
• This is done by filling an area with water with all the drains blocked for a period. Usually done for 24 hours. - FLOOD TEST
• What is the type of solvent use for paints that emits low VOC and has less odor? - WATER-BASED PAINT
• Paints are primarily composed of Pigment, Solvent, and _____. - BINDER
• This type of material has a breathable coating that provides waterproofing for masonry and concrete exteriors. - CEMENTITIOUS COATING
• Bituminous membrane in waterproofing is also known as _____, which is commonly a sticky black semi-solid petroleum - ASPHALT
• Give 1 type of Paint - ENAMEL, LATEX, ALKYD, EPOXY, URETHANE, LOW VOLATILE ORGANIC COMPOUND, EMULSION, ALUMINUM, ANTI-CORROSIVE, CEMENT, PLASTIC, BITUMINOUS
• Give 1 type of paint finishes - FLAT, EGGSHELL, SATIN, SEMI-GLOSS, GLOSS
• It is a kind of waterproofing material where it undergo processes like extruding and injection of mold to create a waterproofing barrier - THERMOPLASTIC WATERPROOFING
• This is a method used to simulate the effects of natural weathering on materials and coatings in a shorter period of time. - ACCELERATED WEATHERING
• This type of window has no way to open or close. Its purpose is to let light into space. Ans: FIXED WINDOW
• Another type of window that can move either horizontal or vertical with the help of roller bearings to facilitate its movement. Ans: SLIDING WINDOW
• It is made out of wood and the shutter panels out of timber, plywood, block, board, hard board etc. This type of door  is commonly provided in houses. Ans: FRAMED AND PANELLED DOORS
• This type of door can be either solid or hollow. They are used for years as they are sturdy options for exterior and interior doors. Ans: Steel Door
• Give the 3 basic parts of a door. Ans: door slab, door frame, rough      opening
• It is resistant to corrosion and moisture, making the perfect material for a bathroom door. Ans: aluminum bathroom doors
• These are typically small windows located above a door or larger window. Ans: Transom Window
• These are hinged on one side and open outward like a door. It can be an excellent choice for bathrooms as they provide good ventilation. Ans: casement window
• It is located at the corners of rooms. This kind of window allows air or light to enter the space from two separate angles. Ans: Corner windows